Pyrometer PYROSPOT Series 11 with fiber optics
Buttons and display
The digital pyrometers PYROSPOT Series 11 with fibre optics and optical head enable non-contact measurent for industrial applikcations. Parameters can be set directly on the device via keyboard and display, and also be adjusted via the RS485 interface with the parameterization and evaluation Software PYROSOFT Spot. .
For temperature measurements, which are independant of the emissivity, the digital ratio-pyrometer DSRF 11N with measuring ranges from 700 °C to 3000 °C is recommended.
- Measurement range from 150 °C to 3000 °C
- Fibre optics and optical head for up to 250 °C ambient temperature
- Measurement uncertainty from 0.5 % (DGF 11N, DSR 11N, DSRF 11N) or 0.5 % + 2 K (DGEF 11N)
- Response time 2 ms (DGF 11N, DGEF 11N, DSR 11N) or 5 ms (DSRF 11N)
- Vario optics with mit measuring spot size from 0,7 mm
- Laserm pilot light
- Keys and display to show the temperature and adjusting the parameters
- Switchable output 0/4 to 20 mA
- RS485 interface for parametrizing and data analysis
- Cast housing, 110 mm × 80 mm × 40 mm, degree of protection IP 65
- Comfortable analysis and parameterization Software PYROSOFT Spot
If you want to describe your measurement problem to us, please use our questionnaire for non-contact temperature measurement (pyrometry).
Pyrometer
| Type | Spectral range | Measurement range | Optics |
| DGEF 11N | 2.0 µm to 2.6 µm | 150 °C to 1200 °C | Vario optics |
| DGF 11N | 1.5 µm to 1.8 µm | 250 °C to 2500 °C | Vario optics |
| DSF 11N | 0.8 µm to 1.1 µm | 600 °C to 3000 °C | Vario optics |
Ratio pyrometer
| Type | Spectral range | Measurement range | Optics |
| DSRF 11N | 0.7 µm to 1.1 µm | 700 °C to 3000 °C | Vario optics |